site map
All applications were processed in Synrad's Applications Facility.
Take the guess-work out of your next laser project.

Try our web-based laser processing calculator!
See Synrad lasers in action!

Synrad lasers are just a part of an integrated solution to industrial cutting, marking, and engraving needs. The primary components of any laser processing system are the laser itself, the beam delivery system, and computer control. While there are many possible laser system variations, most fall into one or a combination of four basic configurations.
1.Move the Laser: The laser and beam focusing assembly are supported on a gantry that can move in one or two axes. movelaser.gif (8027 bytes)
2.Move the Laser Beam: This technique is commonly used for marking (such as Synrad's FH Marking Head). The laser beam is "steered" by two galvanometer- driven mirrors to provide high speed scanning in two axes. movebeam.gif (8016 bytes)
3.Move the Material: A fixed laser plus beam delivery components can be positioned over an XY table which moves the material in two axes beneath the beam movematerial.gif (8621 bytes)
4.Move the Optics: A fixed laser can be coupled to "flying optics", in which moving mirrors direct the laser beam over the stationary work surface. moveoptics.gif (8348 bytes)

Synrad, 4600 Campus Place Mukilteo, WA 98275 USA
Toll Free: 1.800. SYNRAD1 tel: 425.349.3500 fax: 425.349.3667 email: synrad@synrad.com

Copyright © 2016 Synrad. All rights reserved.