site map
v20 Operation Manual
[.pdf format]
Download data sheet
[.pdf format]
How much power do you really need?
Download our free calculator!
See Synrad lasers in action!

The firestar v20 features:

  • 20 Watts
  • Easily integrated with our FH-series Marking Heads
  • Available in both air and water cooled versions
  • Short laser package
  • Fast rise/ fall time

With its compact size, near-perfect beam quality and fast rise times, our v20 laser provides users with the ultimate low power CO2 laser tool.

Ideal for integration into small cutting or marking systems, these lasers have an internal RF power supply and are available in either air or water-cooled versions.

High power from an air-cooled laser with a near-perfect beam provides the ideal source for laser engravers and small-area cutting systems.

firestar v20 (air cooled) Specifications:
Output Power
20W
Mode Quality
TEM00, 95% Purity
M²<1.1 ±0.1
Ellipticity
<1.2
Rise Time
<100µsec
Beam Diameter
2.5mm ± 0.5mm
Beam Divergence
(full angle)
<7.0mR
Wavelength
10.57-10.63µm*
Power Stability:
cold start (guaranteed):
after 2 minutes (typical):
±5%
±3%
Polarization
Linear (Horizontal)
Cooling
Air
Heat Load (max)
350W
Flow Rate (air)
130 CFM x2
Input Voltage / Current
30 VDC / 12A
Dimensions, laser head (in)
15.2 x 4.6 x 5.8
(mm)
386 x 117 x 146
Weight, laser head
16 lbs / 7.3kg
Beam specifications measured at 1/e².
*Typical. Actual wavelength range may vary from 10.2 -10.8
µm.
Specifications subject to change without notice.
Explore other lasers in the firestar v-series:

Synrad, 4600 Campus Place Mukilteo, WA 98275 USA
Toll Free: 1.800. SYNRAD1 tel: 425.349.3500 fax: 425.349.3667 email: synrad@synrad.com

Copyright © 2016 Synrad. All rights reserved.