Coding on Laminated Aluminum Foil Pouches
Aluminum foil is a common material for packaging a variety of food and non-food products. It offers durability, resistance to chemical degradation, and impermeability to water vapor and gases, in addition to being relatively inexpensive compared to similar packaging materials. By adding one or more layers of thin, transparent plastic films (like polyethylene or polypropylene), another layer of resistance to water vapor transmission is created, while providing a means to effectively heat seal the package.
For our purposes, the greatest benefit gained by the addition of the plastic film is the ability to use a CO2 laser to mark information - including expiration dates, product IDs, and tracking numbers - on the outer plastic surfaces. The laser provides a permanent, readable mark, whereas ink or adhesive labels are easily damaged or removed, resulting in the loss of critical information.
For this application, the customer wanted to mark a product ID on laminated poly/aluminum foil pouches. We used a Synrad 48-2 (25 W) laser for these tests along with an FH Flyer marking head equipped with a 200 mm focal length lens, all controlled by Synrad's WinMark Pro software. This setup produces a focused spot size of 290 mm (0.011") on the foil packaging. The mark file consisted of a string of 20 characters, plus the rectangular Lot logo, measuring 98.3 mm x 6.4 mm (3.87" x 0.25"). For a power level of 25 watts, the mark Velocity was set to 254 mm/sec (10 ips).
The resulting mark was completed in a cycle time of 1.03 seconds and is highly legible. The CO2 beam easily melts the plastic film, producing an easily readable, slightly raised mark with an embossed look.
This close-up image shows the embossed, slightly raised mark on the outer plastic surface of the foil pouch.